Instruction manual

72
Transmitter Cond Ind 7100e/2(X)
Specify output current
for testing the connected peripherals
Press conf while in measuring mode and enter pass-
code 5555*. The output current indicated in the main
display can be modified. Select with  key,
edit number with  key, proceed with enter.
The actually measured current is shown in the second-
ary display. The transmitter is in Hold mode.
Press conf, then enter to return to measurement
(Hold remains active for another 20 sec).
Diagnostics functions
Entry/
Display
Action / Remarks
5555*
Cleaning
To remove dust, dirt and spots, the external surfaces of the
device may be wiped with a damp, lint-free cloth. A mild
household cleaner may also be used if necessary.
* Factory setting
70098_E_CI7100_2XH.QXD 27.07.2005 9:28 Uhr Seite 72