Instruction manual

7
Intended use
The Transmitter Cond Ind 7100e/2(X) is used for measurement of
electrical conductivity and temperature in liquids in the field of
biotechnology, chemical and pharmaceutical industry, pulp and
paper, as well as industry, environment, food processing, and
sewage treatment.
The rugged molded enclosure can be wall or pipe mounted or
fixed into a control panel.
The protective hood provides additional protection against direct
weather exposure and mechanical damage.
The transmitter has been designed for application with elec-
trodeless sensors, particularly for the sensors of the InPro 7250
series.
• The Transmitter Cond Ind 7100e/2H is approved for
measurements in FM Class 1 Div 2.
• The Transmitter Cond Ind 7100e/2XH is approved for
operation in the following locations: ATEX, FM Zone 1 with
measurement in Zone 0, and FM Class I Div 1.
Trademarks
The following names are registered trademarks. For practical rea-
sons they are shown without trademark symbol in this manual.
Sensoface
Sensocheck
GainCheck
InPro
®
is a registered trademark of Mettler-Toledo.
HART
®
is a registered trademark of the HART Communication
Foundation (HCF).
70098_E_CI7100_2XH.QXD 27.07.2005 9:27 Uhr Seite 7