Instruction manual

63
Display Action
Remark
The determined cell factor and
zero point are displayed.
Confirm cell factor with
enter .
Clean sensor and re-place it in
the process.
The transmitter now displays
the conductivity and tempera-
ture.
The measured value is shown in
the main display alternately with
“Hold”; “enter” flashes.
Press
enter to end calibration.
Safety prompt
After end of calibra-
tion, the outputs
remain in Hold
mode for approx.
20 sec.
70098_E_CI7100_2XH.QXD 27.07.2005 9:28 Uhr Seite 63