Instruction manual

Transmitter Cond Ind 7100e/2(X)

Configuration

Output current. LIN characteristic. Current start/end

Select sensor

Select measured variable

Enter current start

Enter current end

Set output filter

1. Press conf key.

2. Enter passcode 1200

3. Select Current output menu group

using arrow keys.

Allitems of this menu group

are indicated by the code “o1.”

4. Press enter to select menu,

edit with arrow keys (see Pg 45).

Confirm (and proceed) with enter.

5. End: Press conf, then enter

Current output:

22 mA in the case of error

Signal behavior during HOLD

Select solution (Conc)

Select: LIN characteristic

* Factory setting

70098_E_CI7100_2XH.QXD 27.07.2005 9:27 Uhr Seite 44