Instruction manual

7250 IPR

(Other)

Note

Characters represented in gray are flashing and can be edited.

Code Display

Action

Choices

o1.

Select configuration

(Press conf.)

Enter passcode “1200”*.

(Select position with  arrow key

and edit number with  key.

When the display reads “1200”,

press enter to confirm.)

The transmitter is in HOLD mode

(HOLD icon is on).

Select sensor

InPro 7250 / Other

Select with

 arrow key

Proceed with enter

After correct input a

welcome text (CONF) is

displayed for approx.

3 sec.

* Factory setting

When “Other” sensor has been

selected:

Select temperature probe

Select with

 arrow key

Proceed with enter

Pt1000

(Pt100,

NTC30,

NTC100)

Enter nominal cell factor (CELL).

Select with  arrow key

Proceed with enter

Enter nom. transfer ratio (SFC).

Select with  arrow key

Proceed with enter

70098_E_CI7100_2XH.QXD 27.07.2005 9:27 Uhr Seite 39