Specifications

20 BK Radio
5. Connect the other plug of the cable to the
side connector of the radio you want to
clone.
6. Turn on the clone and set it to the desired
channel group.
7. Press the [*] key on the Master radio
keypad. The radio will respond showing the
prompt ‘PROG|GPHCMD’ on the first line
and ‘Group XX’ on the second line, where
XX is the currently selected group.
Long [*] keypresses will toggle the first line
of the display between PROG|GPHCMD’
and ‘PROG|GPH’, if the second line of the
display shows data that is valid to copy to
the displayed target.
Data Valid Target
GROUP 00 GPHCMD only
GROUP 01 - 25 GPHCMD, GPH
CMND GRP GPHCMD, GPH
PICK LIST GPHCMD only
8. Long [#] keypresses will cause the second
line of the display to cycle through the data
blocks that can be transferred to the target
displayed on the first line.
Target Valid Data
GPHCMD
GROUP 00 or GROUP 01 - 25
CMND GRP
PICK LIST
GPH
GROUP 01 – 25
CMND GRP
9. Once the target and data to be transferred
have been selected, press the [FCN] key on
the Master radio keypad. The top line of the
display will flash ‘CLONING’ while the
program in the master is being downloaded
to the clone.
PROG|GPHcmD
Group 01
PROG|GPH
Group 01
Press and Hold [
*
] Key
to Change Target
PROG|GPHcmD
cmnd group
PROG|GPHcmD
pick list
Press and Hold [
#
] Ke
y
to Change Data
CLONING
Group 01
Keypad Programming Manual 5
 TX Time-Out Timer
 Scan Delay
 Backlight Duration
 Priority 1 Channel
 Priority 1 Group:
(skipped if Channel = OFF or MAIN)
 Priority 2 Channel
 Priority 2 Group:
(skipped if Channel = OFF or MAIN)
B.
GROUP PARAMETERS (CH 00)
Press the [FCN] key at the CH 00 prompt to access group
parameters.
1. Group Options: 1-12345678
This is a group of eight individual options
that can be enabled or disabled.
When an option is enabled, the
corresponding number in the display will
flash. When the option is disabled the
number is steady. If you wish to change the
option from enabled to disabled or vice
versa, press the number key corresponding
to that option.
Options 1 Through 7
Reserved for future options.
Option 8: Group Scan List
When Option 8 is enabled (flashing) the
current group will be scanned when the radio
is operating in Group Scan Mode.
Press the [ENT] key to store the group
options settings into memory and advance to
the next field.
Press the [FCN] key to advance to the next
field without saving changes.
PROG
1-12345678
GRP OPTIONS