Specifications

The Simulator Toolbar 87
The Simulator Toolbar
Displaying and Hiding the Simulator Toolbar
The Simulator toolbar is displayed by default when the Timing window is
shown. You may move it or close it. To re-display the palette, select the
Simulator Tools command from the View menu. To hide the toolbar, sim-
ply uncheck the same menu item.
NOTE: The Simulator toolbar can be displayed even if there is no Timing window
displayed. This allows you to make use of the simulation controls even if
you are not using the Timing window.
Simulator Toolbar Time Display
The status area of the Simulator toolbar displays one of two different time
values, depending upon the status of the simulator:
 If the simulator is reset, it will display “0”.
 Otherwise, it shows the current simulation time as the simulation
progresses.
Show/Hide Timing Window
Add Signal to Timing
Triggers
Simulation Params
Stick Signals
Reset Simulation
Clear Unknowns
Single Step
Stop
Speed Control
Run
Current Time
Zoom In
Zoom Out
Normal Zoom
LW Reference.bk Page 87 Monday, December 15, 2003 5:59 PM