Specifications

Displaying Signals in the Timing Window 85
 Select the traces to be removed by clicking in the label area of the
timing window. You can remove multiple traces in one operation by
holding the key to select multiple labels.
Windows—Right–click on the selected name in the label area at the left side of
the Timing window, then select the Remove command in the pop-up menu.
Macintosh—
a–click on the name in the label area at the left side of the Timing
window. Then select the Remove command in the pop-up menu.
Repositioning Traces
Any collection of selected labels and their corresponding timing traces can be
repositioned within the list by clicking on the desired names—using the
key, if desired, to select more items—and dragging the outlined box
vertically to its new location. Releasing the mouse button will cause the list
to be revised with the labels and traces in their new positions. Alternatively,
the To Top, To Bottom, and Collect commands in the Timing pop–up menu
can be used.
Timing Display Groups
The Timing tool allows multiple signal lines to be grouped into a single
trace with values displayed in hexadecimal.
Creating a Group Trace
A group trace can be created by either of these methods:
 Select any collection of traces by –clicking in the label area, then
select the Group command in the timing pop–up menu.
 Select a bus in the schematic diagram, then select either the Add to
Timing command or Add as Group command in the Simulation menu.
Busses are added as a group by default. They can then be ungrouped, if
desired, using the Ungroup command in the timing pop–up menu.
LW Reference.bk Page 85 Monday, December 15, 2003 5:59 PM