Specifications

Bussing 39
Then select the New Breakout command. The following dialog box will
appear:
If a bus or breakout was selected on the circuit diagram, the New Breakout
Info dialog will display a list of the signals in that bus or breakout; other-
wise, it will be empty. If this list already matches the signals you want in
the new breakout, then just click the “OK” button or press on the
keyboard. Otherwise, edit the signal list, noting the following options:
 Blanks or commas can be used to separate individual names in this list;
therefore bussed signals cannot have names containing a blank or
comma.
 A range of numbered signals can be specified using the following
formats:
D0..7 or D0..D7
is equivalent to
D0 D1 D2 D3 D4 D5 D6 D7
D15..0
is equivalent to
D15 D14 D13 D12 D11 D10 D9 D8 É D0
D15..D00
is equivalent to
D15 D14 D13 D12 D11 D10 D09 D08 D07 É D00
LW Reference.bk Page 39 Monday, December 15, 2003 5:59 PM