Specifications

Name and Pin Number Operations 29
Default Pin Numbers
A device symbol may have default pin numbers which will appear when
the device is first placed. These pin numbers are not permanent and can be
edited or removed by techniques discussed in this section. These default
pin numbers are assigned using the DevEditor tool.
 See Chapter 10, Device Symbol Editing.
Editing Pin Numbers On the Schematic
In Text mode, if the mouse button is pressed with the tip of the pencil
pointer positioned on a signal line within five pixels of a device, a blinking
insertion bar will appear immediately where the signal joins the device.
You cannot set the text position for pin numbers. Type the desired one- to
four-character number, then press or click the mouse button to make
the number permanent.
Editing Pin Numbers Using Get Info
To edit pin numbers using the Get Info dialog box:
 Display the device’s pop-up menu by right-clicking on the device.
 From the pop-up menu, choose Device Info.
 In the Device Info dialog, click on the Pin Info button. This will
display the pin information for the first pin.
 Edit the pin number as desired.
 Click the Next Pin button to see the next pin in the list.
LW Reference.bk Page 29 Monday, December 15, 2003 5:59 PM