Specifications

Section [DevEditor] 251
There are two optional style keywords which may be applied, “BOLD” and
“ITALIC”.
Grid Settings
GridColor =RED, GREEN, BLUE, CYAN, MAGENTA, YELLOW
BLACK, DKGRAY, GRAY, LTGRAY, or WHITE
GridSize = grid
SnapSize = snap
PinSnapSize = pinsnap
The GridColor statement specifies what color to use when drawing the
symbol editor’s Grid. GridSize, SnapSize and PinSnapSize are all
expressed as a 5 pixel multiplier. GridSize specifies the number of 5 pixel
spaces between displayed grid lines. SnapSize sets the grid snap for all
graphical objects, except pins, and PinSnapSize sets the snap used when
positioning pins.
Default Pin Name
PinName = PIN1
BusName=BUS1
These entries set the default name used for normal pins and bus pins,
respectively. When a new pin is added to a symbol, the exact name given
is tried first. If this name is already in use, a numeric part is added, or any
existing numeric part is incremented until a unique name results. You can
force names to always have leading zeros by specifying an initial name
such as PIN001.
Symbol Gallery Location
SymbolGallery = Data Files\Symbol Gallery.clf
This statement specifies the location of the library file to be used as the
"Symbol Gallery", i.e. the list of graphic items displayed while using the
symbol editor. Only one symbol gallery file can be specified. The file
must be a valid DesignWorks symbol library (.clf) file.
LW Reference.bk Page 251 Monday, December 15, 2003 5:59 PM