Specifications

14 Chapter 2—Schematic Editing
Selecting a Pin
A pin is selected by clicking on the pin line close to the device.
NOTE: Since an unconnected device pin is both a pin and a signal, you determine
whether you get the pin or signal pop-up menu as follows:
Right-clicking on the pin in the last 1/4 of the pin length away from the
device will display the signal menu.
 In either version, clicking on the pin close to the device symbol will
display the pin menu.
Selecting Groups of Objects
Several methods are available for selecting multiple objects:
 Any group of adjacent items can be selected by activating the Point
tool and clicking and dragging across the group. A flickering rectangle
Selecting the Signal
Selecting the Pin
LW Reference.bk Page 14 Monday, December 15, 2003 5:59 PM