Specifications

Attribute Pop-Up Menu 221
The selected point on the text is considered to be the reference point for the
given attribute block. This point will be kept fixed if any field value or text
style changes cause the box to be resized.
Hide
This command causes the visible attribute text that was selected to be
removed from the schematic without removing the value from the field.
That is, if you click on the associated object and open the Attributes dialog,
the same value will still be present. If the field was displayed in more than
one place, only the selected one will be removed.
Delete
This command causes the value for this field to be set to null and all visible
occurrences of it on the schematic to be removed.
Duplicate
This command creates another visible occurrence of the same attribute
field. This text can then be dragged or rotated to any desired position on the
schematic.
Rotate Left / Rotate Right
These two commands cause the single visible attribute text item that was
selected to be rotated in the given direction.
Show Field Name
This command allows you to display the field name with the value on the
schematic. When this item is checked, the display will be in the form
fieldName=value. Selecting this command again will cause the display to
revert to the normal value display. This command applies only to the
selected field on the selected object.
LW Reference.bk Page 221 Monday, December 15, 2003 5:59 PM