Specifications

Pin Pop-Up Menu 217
Attributes...
This command displays the standard Attributes dialog for fields associated
with the selected pin.
The Prev Pin and Next Pin buttons on this box can be used to view and edit
other pins on the same device without having to return to the schematic and
select them individually.
Bus Pin Info...
This pop-up menu item will be enabled only when a bus pin on a device is
selected. It allows the association between the bus internal pins on the
device and the signals in the bus to be changed. The following box will be
displayed:
The left-hand list shows the names of the pins contained in the selected bus
pin. The right-hand list shows all the signals in the attached bus. For each
pin in the pin list, the signal on the same row in the signal list is the one
attached to it. Signals in the signal list beyond the end of the pin list are not
connected in this bus pin.
Changing Signal Connections
Two buttons are provided to change the association between pins and sig-
nals. The Join button causes the selected pin in the pin list to be joined to
the selected signal in the signal list. If the selected signal is already
attached to another pin in the list, then the signals will be swapped (i.e., a
LW Reference.bk Page 217 Monday, December 15, 2003 5:59 PM