Specifications

216 Chapter 9—Menu Reference
Pin Pop-Up Menu
A pin pop-up menu is displayed by using the right mouse button to select
any device pin.
NOTE: Since an unconnected device pin is both a pin and a signal, you determine
whether you get the pin or signal pop-up menu as follows:
 Clicking on the pin in the last 1/4 of the pin length away from the
device will display the signal menu.
 Clicking on the pin close to the device symbol will display the pin
menu.
s
Pin Info...
This command displays a standard Pin Info box showing the name, func-
tion, and internal circuit association of the pin, as well as allowing you to
edit the pin’s attributes.
The Prev Pin and Next Pin buttons in this dialog can be used to view and
edit other pins on the same device without having to return to the schematic
and select them individually.
This command is equivalent to selecting the pin and choosing the Get Info
command in the Schematic menu.
Selecting the Signal
Selecting the Pin
LW Reference.bk Page 216 Monday, December 15, 2003 5:59 PM