Specifications

Signal Pop-Up Menu 215
Apply to all connected signals
This option allows you to choose whether the name change applies only to
the selected signal segment (thereby breaking its connection with other
like-named signals), or to all interconnected signal segments.
Visible
This option allows you to choose whether the entered name should be dis-
played on the schematic or not. If the name was already visible and you
uncheck this box, it will be removed from the schematic. In this case, the
name will still be associated with the signal as an invisible attribute. If the
name was not previously visible and you check this box, it will be dis-
played somewhere adjacent to one of the signal line segments.
Cut
This is equivalent to selecting the Cut command in the Edit menu while this
signal is selected. The signal is copied to the Clipboard and removed from
the circuit.
Copy
This is equivalent to selecting the Copy command in the Edit menu while
this signal is selected. The signal is copied to the Clipboard.
Duplicate
This is equivalent to selecting the Duplicate command in the Edit menu
while this signal is selected. The given signal is duplicated and the program
enters Paste mode immediately.
The Clipboard is not affected.
Delete
This is equivalent to selecting the Delete command in the Edit menu. The
signal is deleted from the circuit.
LW Reference.bk Page 215 Monday, December 15, 2003 5:59 PM