Specifications

Simulation Menu Commands 207
 See Chapter 7, Simulation, for more information on the meaning and
usage of device and pin delays.
Clock Parameters Box
When a single clock device is selected, the following parameters box is dis-
played:
The controls in this box are summarized in the following table:
Shortest / longest delay This shows the shortest and longest delays found in any of
the selected devices or pins. (Note that each device or pin
has only a single integer delay value associated with it.)
Delay text box If all selected devices or pins have the same delay value, it
is shown in this box. If a variety of values exist among the
selected items, this box will be empty. Typing a new value
(between 0 and 32,767) in this box will set all items to the
given value.
+ Clicking this button will add 1 to the delays in all selected
items, to a maximum value of 32,767.
– Clicking this button will subtract 1 from the delays in all
selected items, to a minimum value of zero.
1 Clicking this button will set the delay in all selected items to
1.
0 Clicking this button will set the delay in all selected items to
zero.
Low This text box allows you to edit the low time setting of the
selected clock device. Allowable settings are in the range 1
to 32,767.
LW Reference.bk Page 207 Monday, December 15, 2003 5:59 PM