Specifications

202 Chapter 9—Menu Reference
Design Preferences...
The Design Preferences command is used to set a number of options which
have global effect throughout a design. Selecting this command displays
the following dialog:
Show Crosshairs
When this option is enabled, moving crosshairs will follow all cursor move-
ments to assist with alignment of circuit objects.
Show Printed Page Breaks
When this option is enabled, the outlines of the actual printed pages will be
drawn in the circuit window. This will allow you to determine how the
printer page setup will break up the circuit page for printing.
Show Device Frames
When this option is enabled, a gray outline box will be drawn around each
device symbol on the schematic. This is intended to assist in locating where
pins join the symbol, etc. These outlines are not shown in printed or graph-
ics-file output.
Show Background Grid
When this option is enabled, the background grid lines will be drawn in the
schematic window every 10 drawing grid units.
LW Reference.bk Page 202 Monday, December 15, 2003 5:59 PM