Specifications

Schematic Menu Commands 201
ing and has been modified. When you close the internal circuit, you will be
asked if you wish to update other devices of the same type.
Detach Subcircuit
This command turns the currently displayed subcircuit into a separate
design and redefines the parent device as having no internal circuit.
IMPORTANT: 1) This operation permanently removes the subcircuit from the selected device—
and from all other devices of the same type—in the selected design.
2) The Detach operation cannot be Undone!
In particular, Detach Subcircuit performs the following operations on the
subcircuit displayed in the topmost window:
 The circuit is unlinked from its parent device, making it into a separate
design.
 The title of the subcircuit is set to a default “Designxxx” name.
 The internal circuits of all other devices of the same type in the design
are removed.
Discard Subcircuit
This command removes the subcircuit from the selected device and rede-
fines it (and all others of the same type) as having no internal circuit.
IMPORTANT: 1) This operation permanently removes the subcircuit from the selected device—
and from all other devices of the same type—in the selected design.
2) The Discard operation cannot be Undone!
LW Reference.bk Page 201 Monday, December 15, 2003 5:59 PM