Specifications

Schematic Menu Commands 191
The following items of information are shown. Counts apply only to the
topmost circuit level in the design, regardless of any subcircuit windows
that may be open.
Single Object Get Info
If a single object is selected, Get Info displays a dialog box specific to the
object type. To leave any Get Info dialog, click on its OK button or press
the or key on the keyboard.
 More information on schematic objects is found in Chapter 5,
Schematic Editing and Chapter 6, Advanced Schematic Editing.
Devices This is a count of devices in the selected scope. Pseudo-
devices, such as ground symbols and breakouts, are not
included. The count includes devices that have subcircuits.
Signals This is a count of signal nets in the circuit, including
unconnected pins.
Pins This is a count of device pins, not including pseudo-devices.
Change This is a count of editing changes made since the design
was created. This is intended to allow comparison of
different versions of the same file.
Memory used This is a count of the main memory occupied by the
selected part in the design, in Kbytes.
Design Attributes This button displays the standard Attributes dialog for the
current design.
LW Reference.bk Page 191 Monday, December 15, 2003 5:59 PM