Specifications

184 Chapter 9—Menu Reference
Delete
Removes the currently selected objects from the circuit. Pressing the
or key on the keyboard is equivalent to Delete. This
command will be disabled if no devices or signals are selected.
Duplicate
Makes a copy of the selected circuit group—which can be dragged and
positioned as desired. This is equivalent to selecting Copy and then Paste,
except that the selected circuit scrap is not placed on the Clipboard for
future use. See the notes under Paste, above, on how connections are made
when a group is placed in the circuit. Note that the duplicated objects can
be rotated using the orientation tools in the toolbar or the arrow keys on the
keyboard.
Point
This selects the normal operating mode for LogicWorks, indicated by the
arrow cursor. Selecting this command is equivalent to clicking on the
icon in the toolbar. The following functions are accessible in Point mode:
 By clicking on an object, you can select the object for operations using
the Edit menu commands. To select an I/O device, or to select multiple
objects, hold the key on the keyboard while you click.
 By clicking and dragging near the end of a device pin or signal line,
you can extend that line in any direction.
 By clicking and dragging a signal line anywhere except near the end,
you can change its perpendicular position.
 By clicking and dragging any other object, you can reposition the
object.
 All of the above functions are described in more detail in Chapter 5,
Schematic Editing.
LW Reference.bk Page 184 Monday, December 15, 2003 5:59 PM