Specifications

Edit Menu Commands 183
was pasted, the points marked X would be checked for connection to the
existing circuit.
NOTE: Connection “hit testing” can be disabled by holding down the key
while clicking the mouse button (this also applies to single device placing).
In this case, the circuit scrap is placed, but no connections will be made to
adjacent items. This allows the group to be selected again (by -
double-clicking on any device in the group) and moved without interactions
with other objects in the circuit.
Paste will be disabled if the Clipboard contains no information of a recog-
nized type.
Rotation on Paste and Duplicate
Any group of objects being Pasted or Duplicated can be rotated using the
same controls as you use when placing a device:
 The orientation tools in the toolbar.
 The arrow keys on the keyboard.
Note that these controls are only effective while actually moving the flick-
ering image of the object being pasted. Each Paste or Duplicate always
starts in the same orientation as the source.
NOTE: The Orientation command on the Schematic menus cannot be used during
Paste or Duplicate operations, because selecting this menu command will
abort the paste function.
LW Reference.bk Page 183 Monday, December 15, 2003 5:59 PM