Specifications

LogicWorks File Menu Commands 179
Close
Close closes the current document (text, design, or symbol). If the docu-
ment is a design, all the Schematic windows associated with the current
design are closed. If any changes have been made to your design since the
last Open or Save, then you will be asked if you wish to save those
changes.
NOTE: A design may be associated with multiple windows if you have been
working with subcircuits. The design file is closed when the last circuit
window associated with that design is closed.
Save/Save As...
Save and Save As both save the current circuit design in a circuit (.CCT)
file. Save saves the circuit back into the file that it was read from. It will be
disabled if no file has been opened. If you select Save As, a dialog box will
be displayed requesting the name of the new file. The default name will be
the current title of the circuit window (the name of the most recently
opened or saved file).
Revert
This command rereads the current design from the disk file it was last
saved to or read from. If any changes have been made since the last save,
you will be prompted to confirm the choice before they are discarded.
Print...
Print allows you to print all or part of the current document. For design
documents, if the diagram will not fit on a single page, it will be broken
into as many parts as are needed, based upon the paper size specified in
Print Setup. You can preview the page breaks by using the Show Printed
Page Breaks option in the Design Preferences command (Schematic
menu). For purposes of specifying a range to print, pages are numbered
from top to bottom, then left to right. Page numbers do not appear in the
printed output.
LW Reference.bk Page 179 Monday, December 15, 2003 5:59 PM