Specifications

Saving Frequently-Used Graphics and Pins 167
Options menu.
This dialog allows you to select among several different options:
Create a subcircuit
symbol, but don't store
a circuit with it yet
This is the default. It indicates that the part
being made has no associated subcircuit, but
it doesn't rule out that a subcircuit may be
attached by the schematic capture section of
LogicWorks.
Import the port list
from an open circuit,
but don't attached the
circuit.
This is similar to the No Subcircuit option.
No subcircuit becomes associated with the
part, but a port interface is extracted from a
circuit for use with the part. Selecting this
option prompts you to pick an open
schematic circuit. The port names are read
from the circuit without attaching the circuit to
the part. Like the above option, this doesn't
stop a subcircuit from being attached later.
Since a subcircuit wasn't attached to the part,
the port interface is only associated with the
part for the length of the editing session.
LW Reference.bk Page 167 Monday, December 15, 2003 5:59 PM