Specifications

148 Chapter 8—Device Symbol Editing
save or discard the changes.
Saving an Edited Part Back to its Original Library
The Save command saves the contents of the current window back to the library
it was read from. If the open part was not read from a library (i.e. it was just cre-
ated), this item will be disabled.
Saving the Part Under a New Name
To save an open symbol under a new name, or to a library other than the one
from which it was read, select the Save As command in the File menu.
When you select this menu item, the “Save As” dialog will appear. It requires
that a library name be selected from the list and that a name for the part be
entered in the lower box. In this example the Connectors library has been
selected and the part's name has been left to default to “Part1”. A name entered
will become the name of the part in the library, and the title of the window will
be updated to correspond to the new part name.
Only open libraries appear in the list. You can use the New Lib and Open Lib
buttons on this box to create a new, empty library, or open any other existing
library to complete the save.
WARNING: We do not recommend saving your own parts in the standard libraries
provided with LogicWorks, although the program will not prevent you from doing
LW Reference.bk Page 148 Monday, December 15, 2003 5:59 PM