Hardware manual

AGR Series Stage Hardware Manual Installation

2.3. Securing the Stage to the Mounting Surface

AGR series stages have a fixed mounting pattern available to secure the stage to a mounting surface. The

counter-bored mounting holes are designed for 5 mm socket head cap screws (SHCS) for the AGR50 and

AGR75, 6 mm SHCS for the AGR100 and AGR150, and 8 mm SHCSfor the AGR200.

W A R N I N G: The AGR must be mounted securely. Improper mounting can result in injury

and damage to the equipment.

AGR series stages also have a fixed mounting pattern on the side of the stage. The size of the side mounting

holes are M5 for the AGR50 and AGR75; M6 for the AGR100 and AGR150; and M8 for the AGR200.

Figure 2-2: View of an AGR Stage Showing Mounting Holes

2.4. Motor Installation

The basic model of the AGR series of rotary stages are factory shipped with the appropriate sized motor.

When the “no motor” option has been selected or for motor service, access to the motor coupling is provided

by removing half of the split top cover that is directly above the rotary motor (refer to Figure 1-2 for locations

of the coupling access holes).