Hardware manual
Overview AGR Series Stage Hardware Manual
1.5. Safety Procedures and Warnings
The following statements apply wherever the Warning or Danger symbol appears within this manual. Failure
to observe these precautions could result in serious injury to those individuals performing the procedures
and/or damage to the equipment. Operators should be trained before operating this equipment and all service
and maintenance must be performed by qualified personnel.
D A N G E R : This product contains potentially lethal voltages. To reduce the possibility of
electrical shock, bodily injury or death the following precautions must be followed.
1. Access to all AGR and component parts must be restricted while connected to a power
source.
2. Do not connect or disconnect any electrical components or connecting cables while
connected to a power source.
3. Disconnect electrical power before making any mechanical adjustments or performing
maintenance.
4. Make sure AGR and all components are properly grounded in accordance with local
electrical safety requirements.
5. Operator safeguarding requirements must be addressed during final integration of the
product.
W A R N I N G:To minimize the possibility of electrical shock, bodily injury or death the
following precautions must be followed.
1. Moving parts can cause crushing or shearing injuries. Access to all stage and motor parts
must be restricted while connected to a power source.
2. Cables can pose a tripping hazard. Securely mount and position all system cables to avoid
potential hazards.
3. Do not expose the AGR to environments or conditions outside the specified range of
operating environments. Operation in conditions other than those specified can cause
damage to the equipment.
4. The AGR must be mounted securely. Improper mounting can result in injury and damage
to the equipment.
5. Use care when moving the AGR. Manually lifting or transporting the AGR can result in
injury.
6. This AGR is intended for light industrial manufacturing or laboratory use. Use of the AGR
for unintended applications can result in injury and damage to the equipment.
7. If the AGR is used in a manner not specified by the manufacturer, the protection provided
by the AGR can be impaired and result in damage, shock, injury, or death.
16 Chapter 1 www.aerotech.com