Specifications

Page 3
SAFETY PRECAUTIONS
PLEASE READ BEFORE INSTALLING
• Turn preamplifier ‘off’ when plugging in or unplugging input and speaker
cables!!!
• When plugging in or unplugging interconnect cables running from
source to preamplifier, always mute the preamplifier and rotate the
preamplifiers volume control to minimum first. It is recommended that
you turn the amplifier ‘off’ as well for this operation.
• The PRO10 is equipped with raised feet so that continuous ventilation
can be maintained. They help to maintain acoustic feedback into the
amplifier at a minimum. They also provide a measure of protection
against scratching any surface the unit might be resting on. Do not
alter or remove them.
• Do not stack anything on top of the preamplifier (processor,
source...etc.).