Specifications

B&K Components Device Interface Protocol (BKC-DIP) Specification
Version 2.01.00
Updated 01/24/07
Page 54 of 54
(3, R, P1=FF, 0=60;cs16) UNIT3 replies with its current preset Z1 Volume
(0, S, S, 1="DAT";cs16) command to set both UNIT0 and UNIT2 V2 Title
(0, E, S, received cs16; cs16) UNIT0 confirms reception of command
(2, E, S, received cs16; cs16) UNIT2 confirms reception of command
(0, G, P1=00, 1, 2;cs16) request Z1 Preset 0 Volume and Balance from
UNIT0 and UNIT2
(0, E, G, P1=00, received cs16; cs16) UNIT0 confirms reception of command
(2, E, G, P1=00, received cs16; cs16) UNIT2 confirms reception of command
(0, R, P00, 1=60, 2=18;cs16) UNIT0 replies with its Z1 Volume and Balance
(2, R, P00, 1=56, 2=6;cs16) UNIT2 replies with its Z1 Volume and Balance
(0A, G, F4;cs16) request for unit format for Receive ID 0Ah, but since
no such ID on the serial bus, no response. UNIT0,
UNIT1, UNIT2, and UNIT3 all ignore this command.
(FF, G, F4, C; cs16) request BKC-DIP version number from all units
(0, E, G, F4, received cs16; cs16) UNIT0 confirms reception of command
(1, E, G, F4, received cs16; cs16) UNIT1 confirms reception of command
(2, E, G, F4, received cs16; cs16) UNIT2 confirms reception of command
(3, E, G, F4, received cs16; cs16) UNIT3 confirms reception of command
(0, R, F4, C="BKC-DIP V1.01";cs16) UNIT0 replies with BKC-DIP version
(1, R, F4, C="BKC-DIP V1.01";cs16) UNIT1 replies with BKC-DIP version
(2, R, F4, C="BKC-DIP V1.01";cs16) UNIT2 replies with BKC-DIP version
(3, R, F4, C="BKC-DIP V1.01";cs16) UNIT3 replies with BKC-DIP version