Specifications

B&K Components Device Interface Protocol (BKC-DIP) Specification
Version 2.01.00
Updated 01/24/07
Page 5 of 54
Revision History
Version 2.01.00
1. Add new Hardware Special Format (receiveID,G,F9;).
Version 2.00.00
1. New version of BKC-DIP with expanded capabilities and support for multi-hardware zone
devices. See section New Features of BKC-DIP V2.0 vs.V1.0 for details.
2. Override Parameters have diverged to be specific per product. Moved Override Parameters
section to Product Specific Appendices’ Appendix P.
3. Status Update Messages have been moved to the Product Specific Appencies’ Appendix Q
and further detailed.
4. Additional Format Specifiers have been added to support new commands. Refer to Format
Specification: (receiveID, G, Ff; cs16) for more detail.
Version 1.02.01
1. Corrected examples for Set OSD Display command.
2. Corrected note regarding valid OSD row range.
3. Added note about 16:9 Aspect ratio interaction with OSD Display row specification.
Version 1.02.00
1. This is the first version of this documentation which is specified by version number.
2. This document includes augmentation to the original BKC-DIP V1.01 protocol and
supercedes information found in “B&K Components Device Interface Protocol (BKC-DIP)
V1.01 Protocol Document”.
Version 1.01.xx
1. Documentation earlier than Version 1.02.00 was not specified by a version number. This
encompasses all documentation prior to 08/07/00. Prior documentation entitled “B&K
Components Device Interface Protocol (BKC-DIP) V1.01 Protocol Document” described
BKC-DIP Version 1.01 is therefore referred to as Version 1.01.xx here.