Specifications

B&K Components Device Interface Protocol (BKC-DIP) Specification
Version 2.01.00
Updated 01/24/07
Page 46 of 54
row 8=" "
row 9="^_ next item adjust <>"
row A=" MENU setup control B "
This display is from the Selected Input setup menu of Control Out B of a CT 610. Notice that the
text “Input 1 On” is selected, which is indicated by the red color above.
The front panel display depicts a rendition of selected portion the menu, which is:
“CB INPUT 1 ON”
BKC-DIP V1.0 Compliant Display Reply
This display reply format is to maintain backwards compatibility with BKC-DIP V1.0 interfaces.
NOTE: BKC-DIP V1.0 Compliant Display Reply Mode is forced regardless of the OSD and
VFD reply mode if the BKC-DIP V2.0 Enabled parameter is not enabled (i.e. V1.0
compliant).
NOTE: If the BKC-DIP V2.0 Enabled parameter is enabled, the corresponding OSD and VFD
reply modes must be set to BKC-DIP V1.0 Compliant Display Reply Mode to obtain this
reply format.
The format of a BKC-DIP V1.0 Compliant Get Display reply is as follows:
(transmitID, R, D, d, 0="row 0 contents", 1="row 1 contents", ... n="row n contents",
80=row 0 selection, 81=row 1 selection, ... 8n=row n selection; cs16)
d where d is the display device specifier (currently F (front panel) or O (On Screen
Display.
n where n is the last row of the display's buffer.
the return from our example OSD screen would be (with carriage returns added for clarity in this
document):
(0,G,D,O; 01C9)
(0,E,G,D,01C9;02C8)
(0,R,D,O,
0=" CONTROL OUT B ",
1="Input 1 On Input 2 On",
2="Input 3 On Input 4 On",
3="Input 5 On Input 6 On",
4="Input 7 On Input 8 On",
5="Input 9 On Zone In On",
6="FM Tuner On AM Tuner On",
7=" ",
8=" ",
9="^_ next item adjust <>",
A=" MENU setup control B ",
80=0,81=1,82=0,83=0,84=0,85=0,86=0,