Specifications

B&K Components Device Interface Protocol (BKC-DIP) Specification
Version 2.01.00
Updated 01/24/07
Page 15 of 54
Zone Adjustment (Hardware Special) Settings:
(receiveID, S, H, identifier=value,...identifier=value; cs16)
(0,S,H,00=00,09=15;cs16) Set Zone Adjustment parameters 0 and 9
Zone Specific Settings: (receiveID, S, Zzz, identifier = value, ... identifier = value; cs16)
(1, S, Z7, 0=”Living Room”;cs16) Set Z7 Zone title
Macro Settings: (receiveID, S, Mt, identifier = value, ... identifier = value; cs16)
(0,S,M0=A,5=”(0,S,S,0=\”Laser\”;)”;) Set Serial Macro
Tuner Station Settings: (receiveID, S, Tnn, identifier = value, ... identifier = value; cs16)
(0,S,T04,1=20;cs16) Set Tuner Channel 4 parameter 1
Override Settings: (receiveID, S, O, identifier = value, ... identifier = value; cs16)
(0,S,O,0=1;cs16) Set Override parameter 0
IR Command: (receiveID, S, I, z=ir; cs16)
(0,S,I,2=C4;cs16) Set IR Zone 2 command C4
Front Panel Commands: (receiveID, S, F, z=fp; cs16)
(0,S,F,1=0A;cs16) Set Front Panel Zone 1 command A
Error Log Status: (receiveID, G, E, <identifier = value,… identifier = value>;cs16)
(0,S,E,1=0;cs16) Clear unused RAM Error log status
Favorite Settings of a Preset: (receiveID, S, A, identifier=value, ... identifier=value; cs16)
(0,S,A=10,0=1,3=1,4=0; 0459 ) Set Preset 16 favorite in Z0 and Z3, not Z4
D (display) Command
OSD (O): (receiveID, D, O, Ttt, Mm, Xcc, Yrr, "text", ... Xrr, Ycc, "text"; cs16)
(0,D,O,T64, M0, X02, Y04, "Hello World";cs16)
T64 will clear the display after 64h * 100ms (10seconds)
M0 text displayed over background color "blue screen"
X02 displayed text will start at row 02h (the third row)
Y04 displayed text will start at column 04h (the fifth column)
Front Panel Display (F): (receiveID, D, F, Ttt, Xcc, Yrr,"text";cs16)
(0,d, f, t0, x0, y2, "Testing";cs16)
t0 display will NOT be clear by a timeout
x0 displayed text will start at row 00h (the first row)
y2 displayed text will start at column 02h (the third column)
LED display: (receiveID, D, L, Ttt, n=bitmap; cs16)
(00, D, L, T00, 1=21; 0360) Set DOWN and REAR LEVEL LED on
X (executive) Command
NOTE: Please refer to the Appendix L of the appropriate Product Specific Appendices to note
implimentation details and of the executive commands.
Recall Preset Command: (receiveID, X, 0, z=nn; cs16)
(0,X,0,1=4;cs16) Recall Z1 Preset 4 to current preset
Save Preset Command: (receiveID, X, 1, z=nn; cs16)
(0,X,1,2=9;cs16) Save current preset to Zone 2 Preset 9
Power State Command: (receiveID, X, 2, z=onOff; cs16)
(0,X,2,1=1;cs16) Turn Z1 power on
(0,X,2,2=0;cs16) Turn Z2 power off
Noise Generator State Command: (receiveID, X, 3, onOff; cs16)
(0,X,3,1;cs16) Activate noise generator
(0,X,3,0;cs16) Deactivate noise generator
Noise Steering Command: (receiveID, X, 4, index=onOff…, index=onOff; cs16)
(0,X,4,0=1,1=1,5=1;cs16) Noise output Left Front, Center, and Sub
Noise Increment Command: (receiveID, X, 5; cs16)
(0,X,5;cs16) Increment noise output to next valid channel