Specifications

327 SCON
SCON Controller
Controller
Splash
Proof Type
Cleanroom
Type
Arm / Flat
Type
Rod
Type
Slider
Type
Gripper /
Rotary Type
Controller -
Integrated Type
PSEL SCON ACON ERC2
PS-24
Gateway
unit
PCON
Controller
Models
XSEL SSEL ASEL
I/O Specifications
I/O Specifications
The SCON-C supports all of the control methods shown below.
It supports a maximum of 512 positioning points in the positioner mode and up to seven points in the solenoid valve
mode.
n Controller Functions by Type
Item
Input voltage
Input current
ON/OFF voltage
Insulation method
Specification
24VDC ± 10%
4mA/point
ON voltage
...
Min DC18.0V (3.5mA)
OFF voltage
...
Max DC6.0V (1mA)
Photocoupler
+24V
0V
5.6kΩ
Each input
Each input
Internal
circuit
Logic
circuit
n Input Part External input specifications
Item
Load voltage
Maximum load current
Residual voltage
Insulation method
Specification
DC24V
100mA/point 400mA/8 points
Max 0.1mA/point
Photocoupler
Each output
Each output
10Ω
Internal
circuit
Load
Load
Logic
circuit
+24V
0V
5.6kΩ
Each input
Each input
Internal
circuit
Logic
circuit
Each output
Each
output
10Ω
Internal
circuit
Load
Load
Logic
circuit
n Output Part External output specifications
NPN specification NPN specification
PNP specification PNP specification
Type
SCON-C
Features
Positioner mode
A basic ope rati on mode in which the
actuator is operated by specifying a position
number and then inputting a start signal.
Teaching mode
In this mode, the slider (rod) can be moved
by means of an external signal to store the
achieved position as position data.
Solenoid valve
mode
The actuator can be moved simply by ON/OFF of position
signals. This mode supports the same control actions you
are already familiar with on solenoid valves of air cylinders.
Pulse train
mode
In this mode, you can operate the actuator
freely using pulse trains without inputting
position data.
Network support
The controller can be connected directly to
a field network by selecting an applicable
network option.
www.actuator.ru тел.:[phone], e-mail: [e-mail]