Owner`s manual

BANKER BK-10 OPERATIONS GUIDE

(Be sure to view the enclosed DVD video on how to operate The Banker)

Key in Cashier #, Manager # or Lane #, etc. and depresses the P Key one time after each entry.

Verify that the BANKER display is at the 1c (Penny) Prompt.

NOTE: If not, use the up Arrow or down Arrow key to get to the 1c Prompt

Place the Till Cup with the loose Pennies on the Bankers Platter.

Wait for the “beep” and display will show the count of Pennies in the Till Cup.

Remove the Till Cup from the Banker and the Qty & Dollar ($) amount will be printed.

Repeat this process for the remaining denominations of loose coins.

Rolled Coin: All Rolled Coin is counted at the $1- (Dollar) prompt, before counting $1 bills.

 Do Not place rolls of coin in the till cups!! All rolls of coin can be counted together,

BUT must be placed on the Banker one at a time until verified as a Good Roll or Short

Roll.

 Wait for the $ amount to display and the “Beep”

 Remove all rolls together at one time.

 Count Currency starting with the Dollar Bills (1- ) and repeat the process until all

remaining denominations have been counted.

Press the CE key for a SUBTOTAL

Subtract your Starting Till Cash $ amount. The remainder is the $ Amount to be turned in

as the final pickup/drop.

Remove the amount to be turned in by starting with the highest currency denomination,

off of the printer receipt, and input this into the BANKER, followed by the (-) minus key.

Repeat this operation until the display is back to 0.00 Press the C key to clear the TOTAL.

Repeat steps 1-9 to verify the till for issuance and for a tape