User Manual

1-50
Example 3:
If it needs to execute Program 2 right after Program 1 is executed then program
1 shall be modified to have NEXT 2 command. The following steps can be
taken for the modification and execute the programs.
PROG 1
Select program 1
PROG:NEXT 2
Change the NEXT command from
NEXT 0 to NEXT 2
PROG:SAV
After edit is complete use Save
command to store changes in the
hardware
PROG 1
PROG:RUN ON
To run the program, select the program
number first and then use RUN ON
command to execute it.