User Manual

1-36

on the right hand side. Enter the OCP value by pressing the numerical keys.

4.5 Voltage Output

After the voltage, current and protection settings are entered, press

output voltage. User will be able to recognize the setting values and the actual

output values from the LCD.

4.6 Control Voltage Output with Rotary knob

When the output is ON, user may still increase or decrease the output voltage by

turning the rotary knob. The procedure is: press

and cursor appears in

response; press

to move the cursor to the digit you want to

change and turn the knob to increase or decrease the output voltage value at the

cursor. The changes of the voltage setting and the output voltage can be observed.

4.7 Timer Function

When the “Timer Setting” function is ON, it will activate the timer. After timer

setting is made, return to the main screen. After setting up the output current &

voltage and press to output, the screen will show the countdown of the

timer. Once it reaches down to zero, the supply will turn off the output

automatically.

41 4

.= 1