User Manual

1-21
6.1 CURRENT COUNTER TEST: Press to enter the CURRENT
COUNTER TEST screen.
Refer to “Current Counting” section for the detailed setting procedure.
6.2 PROGRAM MODE: Press to enter the PROGRAM MODE
menu.
Before running the program, user needs to input the programmed
values through the USB or GPIB interface into the power supplies.
Users may save up to 10 programs (program number 1 through 10)
inside the memory and recall them in this Program Mode screen by
selecting the program number and then pressing to execute
the program.
6.3 MEASURE AVERAGE: Press to enter the MEASURE
AVERAGE page.
AVERAGE TIME:
Set the average measure time.
= 1 . = .
:
.
FF= 1 .
:
1=
AVERAGE TIME = 2