User Manual

1-17
BEEP:
Turns the Buzzer ON/OFF
LCD BACKLIT:
Set the backlight of the LCD to Always
ON or OFF after 1/5/10/30 minutes
RECALL DEFAULT:
Restores the manufacturer default
settings
Ext 5V OUTPUT:
Turns the extra 5V power output (on the rear
panel) ON/OFF.
POWER ON STATE:
Users can set the output state of the supply
when powered on. When OFF is selected, the
XLN series will do nothing after power on. If
LAST is selected, then at power on the supply
will use the last setting before it turned off
previously. If USER (user defined) is selected,
a prompt will ask for setting output voltage,
current, and output state. Once set, these
values are then used the next time the supply
is powered on.
HOT KEY:
Set the HOT KEY function ON/OFF. If the
HOT KEY function is ON, user can use 0 – 9
number keys to recall the voltage and current
L
=
F L
L=
=
L
L
L
.
FF=
F
=
,
=
.
F
=
,
FF
5
=
HOT KEY = OFF