User Manual

1-10
2.4 Storage
The storage temperature range of this product is within -10ºC - 70ºC and R.H.
should be within 80% without moisture condensing. If not operating this
product for a long time interval, pack it with original packaging or similar one
and put it in a dry place without exposure to direct sunlight.
2.5 Power-line voltage
Rated AC power source connected to this product is within 100 V-240 V (refer
to the Product Specification for details). Before connecting to external power
source, be sure that the power switch is in OFF state and verify the suitability
of power cable (including the extension line). It should be compatible with the
rated voltage/current and should be firmly connected.
Warning:
The power cable attached with this product is certified for
safety. To change a cable or add an extension cable, be
sure that it can meet the required power ratings of this
product. Any misuse with an additional cable would
void the warranty of this product.
2.6 Fuses
This product is a switching mode power supply. The fuse installed inside is a
multi-barrier protection hardware design. It should not break under normal
operation. In case the fuse does melt, it indicates another malfunction that
causes the fuse to break. In this case, it is suggested to send this product back
to service.
Warning:
Any disassembling of the casing or changing the fuse not
performed by an authorized service technician will void
the warranty of the instrument.