User Manual

knob

When the output is ON, a user may still increase or decrease the output voltage

by turning the rotary knob. Press

and the cursor appears in response;

press

to move the cursor to the digit you want to change and

turn the knob to increase or decrease the output voltage value at the cursor. The

changes of the voltage setting and the output voltage will immediately apply.

2.11 Timer Function

When the “Timer Setting” function is ON, it will activate the timer. After the

timer setting is made, return to the main screen. Set up the output current &

voltage and press to output. The screen will show the countdown of

the timer. Once it reaches zero, the supply will turn off the output

automatically.

2.12 Parallel Mode Setting

The power supplies can be connected in parallel (up to 4 units of the same model)

to increase the power output capability and to increase the total output current.

With 4 units connected, up to 6240 W maximum can be output. Below is a

diagram showing 4 units connected in parallel.

.= 1

ce55