User Manual

31
2.7 Overcurrent Protection OCP
Press to enter the “Configuration” menu and press to enter the
PROTECTION setting screen. Then, use the knob to set OCP to ON and press
to confirm it. Now the cursor will move to the value setting for the OCP
on the right hand side. Enter the OCP value by pressing the numerical keys.
2.8 Overpower Protection OPP
Press to enter the “Configuration” menu and press to enter the
PROTECTION setting screen. Then, use the knob to set OPP to ON and press
to confirm it. Now the cursor will move to the value setting for the OCP
on the right hand side. Enter the OPP value by pressing the numerical keys.
2.9 Voltage Output
After the voltage, current and protection settings are entered, press to
output voltage. User will be able to recognize the setting values and the actual
output values from the LCD.
2.10 Control Voltage Output with Rotary
F
=
=
=
F
S
=
S
S
=
=
.
3
01
.
.
6
5 3 4
56
.=
.
.= 1
.
1