User Manual

follows: positive sense (+S) and positive lead (+) of the DC output are

connected to the positive end (+) of the device, whereas negative sense (-

S) and negative lead (-) of the DC output are connected to the negative

end (-) of the device under test. This connection will compensate the

voltage dropped due to current flow through long power wires (the

maximum compensation voltage is 2 V or 5 V depending on the model).

Refer to the connection diagram below to configure local sense or

remote sense.

(52) AC power input:

The power receptacle is rated for a power input within 100 VAC - 240

VAC.