User Manual

28
2.3 Rear Panel Overview
(44) LAN (Ethernet) Interface:
RJ-45 LAN connector for remote communication.
(45) GPIB Interface:
GPIB connector for remote communication.
(46) Main Output (+ + - -):
The main output of the power supply.
(47) Earth connection:
Used for earth ground connection.
(48) USB Interface:
USB interface for remote communication.
(49) RS485 Interface:
While operating in parallel connection or multi unit connection (CHAIN)
mode, the RS485 interface can be used for communication and
synchronization between master and slave.
(50) Analog Interface:
Remote analog control interface allows for programming and monitoring
the power supply’s output with external analog controls.
(51) RMT/LCL Sense:
When Remote sense is selected, the wire connection can be set up as
21
16 17 1918
2320 22 24