User Manual

26
EXTERNAL CONTROL: Press to enter the
EXTERNAL CONTROL menu.
Users can enable/disable external control in this menu option.
An external voltage source (VOLT) or resistor (RES) can be
used to control the output voltage and current. The external
voltage/resistance can be either 0 - 10V/0 - 10K (10V/10K) or
0 - 5V/0 - 5K (5V/5K). Users can also monitor the output status
by reading the monitoring pins (0 - 10V or 0 - 5V) of the
external analog control interface.
7. TIMER CONTROL
Press in the third page of menu to enter TIMER CONTROL screen.
TIMER:
Turn on/off TIMER function.
TIME:
Set up OUTPUT ON time (Max:999Hr 59Min
59Sec)
8. CALIBRATION
L =L L
=L L
= 1 1
= 1
FF = FF L
L =
=
=
FF
r ni ec