User Manual

22
for setting output voltage, current, and output
state. Once set, these values will then apply
during the next power up.
IP CONFIG:
STATIC : User can input IP address
DHCP : not supported
IP ADDRESS:
Users can enter a static IP address here.
Note: If you are not sure of the IP settings, consult
your network administrator.
2. OUTPUT SETTING:
Press in the first page of the menu to enter OUTPUT SETTING
menu.
VOLT LIMIT MAX:
Upper limit of the output voltage setting
XLN15010 – 150.5 V max.
XLN30052 – 300.5 V max.
XLN60026 – 600.5 V max.
CURR LIMIT MAX:
Upper limit of the output current setting
=
5
F
52=
= F
552. 552. 552.
F
L
VOLT LIMIT MAX = _300.50 V
CURR LIMIT MAX = 4.5000 A
VOLT LIMIT MIN = 0.000 V
CURR LIMIT MIN = 0.010 A
VOLT SLEW RATE = 3.300 V/mS
CURR SLEW RATE = 0.0520 A/mS