User Manual

BEEP:

Turns the Buzzer ON/OFF

LCD BACKLIT:

Set the backlight of the LCD to Always

ON or OFF after 1/5/10/30 minutes

RECALL DEFAULT:

Restores the manufacturer default

settings

KEY LOCK:

While exiting the setting screen after enabling KEY

LOCK, all keys except the key are locked.

Only this key can disable KEY LOCK.

*Simultaneously pressing both and keys in the main

screen can also lock keys.

*While entering KEY LOCK state, the display will show an LCK indicator

in the bottom right corner.

POWER ON STATE:

Users can set the output state of the supply

when it is powered on. When OFF is selected,

the power on state configuration will not be

recalled. If LAST is selected, then at power on

the supply will configure to the last settings

before it was turned off previously. If USER

(user defined) is selected, a prompt will ask

1 1

F L

= FF