User Manual

18
display to show voltage and current or power and load resistance as shown
below:
(40) Rotary knob:
Use this knob to adjust voltage or current when the output is ON (press
first to let cursor display first).
(41) Enter :
This key is used to confirm any changes to the settings within the menu or
the voltage and current setting value.
(42) Mem :
Press this key to access the instrument settings memory location. Users
can then use the numerical key or knob to select the memory location to
save or recall the voltage and current configuration by pressing the STORE
or RECALL key. 10 memory locations are available.
(43) Menu :
Use this key to enter the power supply’s menu. Users can press
= . FF1
.
= .
.
1
.
= .
.
1= . FF1
= FF
. .