User Manual

14
CAUTION: Connection of this power supply to an AC power source
should be made by a qualified electrician or other qualified personnel.
Incorrect wiring may damage the power supply or cause a fire hazard.
Warning:
SHOCK HAZARD turn off AC power before making rear
panel connections. All wires must be properly connected
with screws securely tightened
1.9 Fuses
This product is a switching mode power supply. The fuse installed inside
should not break under normal operation. In case the fuse is blown, it may
indicate a malfunction in the unit. In this event, contact B&K Precision.
Warning:
Any disassembling of the casing or changing the fuse not
performed by an authorized service technician will void
the warranty of the instrument.
1.10 Warm-up Time
The XLN series is fully operable upon switching the power on. However, to
G
N
L