User Manual

12
1.8 Connecting AC Input
The power supply’s AC input is rated for 100 V – 240 V, with frequency
of 47 Hz – 63 Hz. Before connecting to an external AC power source, be sure
that the power switch is in the OFF state and use the supplied power cord
assembly. connected.
Warning:
SHOCK HAZARD The power cord provides a chassis
ground thought a third conductor. Verify that your power
outlit is of the three-conductor type with the correct pin
connected to earth ground.
Follow the illustrations below to connect the AC power cord to the AC input
of the power supply in the rear panel.
1. First, connect the input receptacle (green terminal block) of the cable to
the input terminals of the power supply.
2. Align the power cord housing mounting holes on the left and right side to
the screw holes on the power supply.
3. Use only the included screws to fasten and secure the cable housing
assembly