User manual

10
The included AC power cord is safety certified for this
instrument operating in rated range. To change a cable
or add an extension cable, be sure that it can meet the
required power ratings for this instrument. Any misuse
with wrong or unsafe cables will void the warranty.
SHOCK HAZARD:
The power cord provides a chassis ground through a
third conductor. Verify that your power outlet is of the
three-conductor type with the correct pin connected to
earth ground.
Follow the instructions below to connect the AC power cable to the AC
input of the power supply in the rear panel.
1. First, connect the input receptacle (green terminal block) of the
cable to the input terminals of the power supply.
2. Align the power cord housing mounting holes on the left and
right side to the screw holes on the power supply.
3. Use only the included screws to fasten and secure the cable
housing assembly.